10.22.7. Replacement of the switch of an alarm lamp of turning on of the parking brake
It will be required to you: a key "on 8", the screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove facing of a tunnel of a floor (see. "Removal and installation of facing of a tunnel of a floor").
3. Disconnect a block of a plait of wires from the switch of an alarm lamp of turning on of the parking brake.
|
4. Turn out the screw of fastening of the switch of an alarm lamp of turning on of the parking brake …
|
5. … also remove the switch.
6. Establish details as it should be, the return to removal.