10.24.4. Removal and installation of the control unit of electronic anticreeping system

You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an overlay of the dashboard (see. "Removal and installation of the dashboard").
3. Hook the screw-driver and wring out a clamp …
4. … cast away a block clip …
5. … also disconnect a block of a plait of wires.
6. Similarly disconnect other blocks of wires from conclusions of the block of anticreeping system.
7. Turn out two screws …
8. … also take the electronic block of anticreeping system from under the dashboard.
9. Establish the removed details as it should be, the return to removal.