You will need TORX T50 key.

Note Work is shown for the left seat, the right seat is removed similarly.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Shift a seat against the stop back and turn out two forward bolts of fastening of the directing sled to the body basis.	3. Shift a seat against the stop forward and turn out two back bolts of fastening of the directing sled to the body basis.

4. Raise a seat and, having squeezed fastening clamps …	5. … disconnect a block of a plait of wires of a prednatyazhitel of a seat belt.

6. Take out a seat from interior of the car.

7. Establish a seat as it should be, the return to removal. Before installation apply an anaerobic clamp of a carving on bolts of fastening of a seat.