The pillow and back of a back seat consist of two parts, each of which can be removed separately. Removal of the left part of a pillow is shown, the right part is removed similarly. Both parts of a back of a back seat are united in the general knot by the average hinge for their tilting. Therefore the back of a back seat can be removed only assembled, without separating its part.

It will be required to you: keys of TORX T50 and TORX T55.

1. Turn out two bolts of fastening of hinges of the left part of a pillow of a back seat to the body basis …	2. … also take the left part of a pillow from interior of the car.

3. Similarly remove the right part of a pillow, having turned out two bolts of fastening of its hinge to the body basis.

4. Turn out two bolts of forward fastening of the average hinge of a back of a back seat to the body basis …

Note Bolts of forward fastening of the average hinge of a back of a back seat at the same time to the basis of a body attached locks of seat belts.

5. … two bolts of back fastening of the average hinge …	6. … and on two bolts of fastening of the left and right hinges of a back.

7. Unfasten locks of fastening of parts of a back of a back seat to a body as it is described in section 1 "The car device" (see. "Back seats"), also take a back from interior of the car.

8. In need of removal of a latch of the lock of a back of a back seat remove average and top upholsteries of a sidewall (see. "Removal and installation of upholsteries of a luggage carrier") …	9. … also turn out five bolts of its fastening to a sidewall.

Note In detail removal of a latch of the lock of a back of a back seat is described in the subsection "Replacement of a Back Seat Belt".

10. Establish details as it should be, the return to removal.