11.15.2. Removal and installation of an internal mirror
You will need the screw-driver with a flat edge.
1. Wring out the screw-driver a clamp on a mirror arm …
Note
The clamp on a mirror arm is so located (it is for descriptive reasons shown on the removed mirror).
|
4. Establish an internal mirror as it should be, the return to removal.
Note
The arm of fastening of an internal rear-view mirror is pasted to glass by special glue. If for any reason it comes unstuck from glass, it can be pasted on the place (see. "Replacement of a motionless glazing of a body").
|