It will be required to you: a key of TORX T50, the screw-driver with flat and crosswise edges.

1. Open a back door.

2. Remove from holders of a door (at the left and on the right) the top ends of cords for lifting of the shelf of a luggage carrier …	3. … also take the shelf.

4. Cast away a back of a back seat, turn out two screws of fastening …	5. … also remove average facing of a sidewall, having overcome the elastic resistance of her holders.

Note Installation sites of holders on average facing are so located.

6. Before removal of the top facing of a sidewall and back rack turn out the screw of the top fastening of a seat belt.	7. Hook a percussion cap two screw-drivers with thin edges …

8. … also take a percussion cap.	9. Hook the screw-driver and take a decorative cap …

10. … turn out the screw …	11. … and, overcoming the elastic resistance of holders, remove facing.

Note Installation sites of holders on facing of a sidewall and back rack are so located.

12. Having overcome the elastic resistance of holders, remove facing of the panel of a back.	13. Remove angular facing, overcoming the elastic resistance of her holders.

14. Establish the removed details in the sequence, the return to removal.