11.6. Removal and installation of a forward wing
It will be required to you: a key and a face head "on 10".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a mudguard …
|
3. … and the forward flap (see. "Removal and installation of mudguards of wheels and flaps").
|
4. Remove a side lamp of the index of turn (see. "Replacement of a side lamp of the index of turn").
|
5. Remove a front bumper (see. "Removal and installation of a front bumper and its bar").
|
6. Remove a block headlight (see. "Replacement of a block headlight").
|
7. Turn out two bolts of fastening of a wing to a framework of a motor compartment …
|
8. … and two bolts of fastening to a threshold.
|
9. Take the vibroextinguishing insert from a wing cavity.
|
10. From within a wing turn out a bolt of its fastening to a forward rack of a body.
|
11. Turn out forward and back bolts of the top fastening of a wing to a framework of a motor compartment, two bolts of fastening of a loop of a cowl to a body and remove a wing.
|
Notes
Before a reversing of bolts of fastening of a loop of a cowl ask the assistant to hold a cowl, and before removal of a wing — to raise it so that between a loop and a wing the gap sufficient for removal of a wing from the shelf of a framework of a motor compartment was formed. After removal of a wing temporarily fix a cowl loop on a framework at least by one bolt.
In the absence of the assistant before removal of a wing it is necessary to remove a cowl previously (see. "Removal and installation of a cowl").
|
12. Establish details as it should be, the return to removal.