11.7. Removal and installation of a lattice of a box of airinflow
The lattice of a box of airinflow is removed at its damage or for receiving access to a screen wiper of a wind window, and also when replacing glass of a wind window.
You will need the screw-driver with a flat edge.
1. Open a cowl and establish it on an emphasis.
2. Remove levers from axes of leads of a trapeze of a screen wiper (see. "Replacement of levers of a screen wiper of a wind window").
|
3. On both sides of a lattice of a box of airinflow put forward clamps of percussion caps of fastening of two decorative slips, having hooked them the screw-driver …
|
8. Having raised edges of a lattice of a box of airinflow, bring its clamps out of openings on a body …
|
9. … also remove a lattice.
|
10. Establish details as it should be, the return to removal.