11.9.8. Removal and installation of an upholstery of a back door

It will be required to you: the screw-driver with a flat edge, TORX T40 key.
1. Remove the internal handle of the lock of a back door (see. "Replacement of the internal handle of the drive of the lock of a back door").
2. Hook the window regulator handle the screw-driver …
3. … and, overcoming resistance of a metal clamp, remove the handle from the car.

Note
The window regulator handle clamp is so located. Replace a clamp if it is damaged.

4. Hook the screw-driver a cap of the screw of fastening of an upholstery of a back door …
5. … take a cap …
6. … also turn out the screw of fastening of an upholstery.
7. Overcoming resistance of plastic holders, remove a door upholstery.

Notes
Plastic holders of an upholstery of a door are so located.
In case of damage of holders replace them new.

8. Establish an upholstery of a back door as it should be, the return to removal.