Over time in system of ventilation of a case of the engine the resinous deposits from crankcase gases complicating removal of these gases in engine cylinders for burning collect. Because of it pressure of gases in the engine increases and oil leaks through consolidations appear. In order that it was not, periodically clear and wash out system.

You will need the screw-driver with a flat edge.

Good advice Clear system of ventilation of a case before each replacement of oil.

1. Remove the case of the air filter (see. "Check and replacement of the filtering element of the air filter").

2. Turn out ten bolts of fastening of a cover of the case of the air filter …	3. … also uncover.

4. Take the filter of system of ventilation of a case from a groove of the case of the air filter.

Note Replace strongly polluted filter new.

5. Disconnect a hose from felling of a cover of a head of the block of cylinders.

6. Uncover a head of the block of cylinders (see. "Replacement of laying of a cover of a head of the block of cylinders of the engine").

Good advice At each removal of a cover of a head of the block of cylinders replace its laying new.

7. Wash out gasoline or kerosene maslootrazhatel, an internal surface of a cover of a head of the block of cylinders and its branch pipe.

8. Establish a cover of a head of the block of cylinders and hoses of system of ventilation of a case as it should be, the return to removal.