4.3.9. Check and replacement of the filtering element of the air filter

You will need a face head "on 8".
1. Remove the airbringing sleeve.
2. Remove a collar of fastening of a hose to a branch pipe of the case of the air filter …
3. … disconnect a hose and take it aside.

Note
Collar of fastening of a hose of one-time use, at assembly replace it new.

4. Disconnect a hose of ventilation of a case.
5. Turn out two bolts of fastening of the case of the air filter …
6. … also remove the case of the air filter.

Note
Back part of the case of the air filter is established on guides.

7. Turn out ten bolts of fastening of a cover of the case of the air filter …
8. … uncover...
9. … also take the filtering element from the case of the air filter.
10. Examine the filtering element. Blow it compressed air. Replace strongly polluted filtering element.
11. If it is necessary, remove dust and dirt from the case of the air filter.
12. Install the new filtering element in the case.

Note
The filtering element has the rectangular shape corresponding to a form of the case of the air filter therefore the wrong installation of an element is excluded.

13. Establish details as it should be, the return to removal.