The engine mudguard located in a motor compartment on the right from below protects podkapotny space from pollution and is not power protection of a case of the engine.

Note For protection of a case of the engine, and also all knots and units located in a motor compartment from damage by the stones which are taking off from under wheels the plastic or steel board by request can be installed on the car. However it is necessary to consider that this board is not able to protect an engine case from strong blows against big road obstacles (big stones, stubs, borders, etc.) as at the same time he can be damaged and will not be able to protect an engine case from damage.

Remove an engine mudguard at its damage or for ensuring access to knots and units from below of the car when carrying out repair and maintenance. In this section removal and installation only of an engine mudguard as additional protection of a case of the engine is fixed in each case individually are described (depending on its design).

It will be required to you: TORX T30 key, knife.

1. Cut off three collars of fastening of a hose of air conditioning system …

Note Collars of fastening of a hose of air conditioning system are so located.

2. … take the remains of collars from cuts on a mudguard …	3. … also take a hose aside.

4. Turn out two screws of fastening of a mudguard …	5. … also remove a mudguard from the car.

6. Establish a mudguard upside-down, having attached to it air conditioning system hose new collars.