It will be required to you: keys "on 10", "on 18", a face head "on 15", the screw-driver with a flat edge.

1. Remove an arm of fastening of the shelf of the rechargeable battery (see. "Removal and installation of an arm of the shelf of fastening of the rechargeable battery").

2. Establish a reliable support under a transmission case or you will hang out the power unit the load-lifting mechanism.

3. Turn off a nut of a hairpin of fastening of the left support of a suspension bracket of the power unit to an arm …	4. … turn out two nuts of hairpins of fastening of a support to a body …

5. … also remove a support from the car.

6. Establish the left support of a suspension bracket of the power unit and all removed details as it should be, the return to removal.

Notes Pay attention to marking of a support. Get a new support with the same marking. At installation of a support on the car orient it so that the gear edge of inflow of a pillow of a support (it is shown by an arrow) was directed in the direction of the movement of the car forward.