5.9.1. Replacement of laying of a cover of a head of the block of cylinders

If the oil leak from under a cover of a head of the block of cylinders did not manage to be eliminated with tightening of bolts of fastening of a cover, replace its laying.
You will need a key "on 12".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the air filter (see. "Removal and installation of the air filter").
3. Turn out a bolt of fastening of the top cover of a belt of the gas-distributing mechanism to a cover of a head of the block of cylinders.
4. Disconnect a hose of ventilation of a case from a cover of a head of the block of cylinders.
5. Remove tips of high-voltage wires from spark plugs.
6. Turn off holders of the air filter from hairpins of fastening of a cover of a head of the block of cylinders …
7. … also remove holders.
8. Turn off a nut of fastening of an arm of a block of a plait of wires of the sensor of concentration of oxygen …
9. … also remove an arm from a bolt hairpin.
10. Turn out three bolts hairpins of fastening of a cover of a head of the block of cylinders …
11. … nine bolts of fastening of a cover of a head of the block of cylinders …
12. … also uncover.
13. Take old laying from grooves of a cover of a head of the block of cylinders.
14. Clear a block head surface of the remains of old laying.

Fig. 5.2. Order of an inhaling of bolts of fastening of a cover of a head of the block of cylinders

15. Establish a cover of a head of the block of cylinders with new laying and all removed details as it should be, the return to removal. Tighten bolts and bolts hairpins of fastening of a cover in the order shown in fig. 5.2 in two stages:
The 1st stage — a preliminary inhaling the moment of 3,0 N · m (0,3 kgfs · l);
The 2nd stage — a final inhaling the moment of 9,0 N · m (0,9 kgfs · м).