6.2.6. Removal and installation of the coulisse of a control lever transmission
It will be required to you: the screw-driver with a flat edge, a face key "on 10", the hammer.
1. Remove facing of a tunnel of a floor (see. "Removal and installation of facing of a tunnel of a floor").
2. Hook the screw-driver a tip of a cable of the choice of transfers …
|
3. … also disconnect a tip from a lead.
|
4. Similarly disconnect a cable tip from a control lever the transmission.
5. Turn an emphasis of a cable of the choice of transfers counterclockwise …
|
6. … also take a cover emphasis from an arm of the coulisse of a control lever the transmission.
|
7. Similarly disconnect a gear shifting cable cover emphasis.
Note
Clamp of an emphasis of a cover of a cable of gear shifting of white color, and cable of the choice of transfers — black. Remember their arrangement not to mix in places at the return installation.
|
8. Turn out four nuts of hairpins of fastening of the coulisse of the lever of gear shifting to a body, take washers and remove the coulisse.
9. Establish details as it should be, the return to removal.