You will need a stripper of bearings.

Note We recommend to replace bearings of both naves of forward wheels at the same time.

1. Remove a rotary fist (see. "Removal and installation of a rotary fist").	2. Establish a stripper and a vypressuyta from a rotary fist a nave assembled with the bearing.

Prevention After removal of a nave the bearing is not suitable for reuse therefore it should be replaced.

Note In the spare part the original bearing is delivered assembled with a nave therefore further dismantling does not make sense.

3. Press a nave with the bearing against the stop in a rotary fist.

4. Establish details as it should be, the return to removal.

5. Check and if necessary adjust the angles of installation of wheels. Use services of the workshops having the special equipment.