It will be required to you: keys "on 13", "on 15", "on 18", a face head "on 8".

Preventions Before lifting a back part of the car, include the I transfer and establish an emphasis under forward wheels. Having raised a back part, establish reliable support near a jack. Replace shock-absorbers (left and right) with couples. Do not remove both shock-absorbers at the same time on the hung-out back part of the car as lowering of a beam of a back suspension bracket below of an admissible limit can give to damage of pipelines and hoses of the brake system.

1. Remove back flaps (see. "Removal and installation of mudguards of wheels and flaps").	2. Establish a jack and slightly to a poddomkratta a back beam to unload a bolt of the lower fastening of the shock-absorber.

3. Holding a bolt from a provorachivaniye, the second key turn off a nut …	4. … also take a shock-absorber eye from an arm of the lower fastening.

5. Turn out two bolts of fastening of a support of the top fastening of the shock-absorber …	6. … also remove the shock-absorber from the car.

7. Turn off a nut of fastening of a rod of the shock-absorber, holding a rod from a provorachivaniye, and remove the top support of the back shock-absorber. Attentively examine the top support of the shock-absorber – it should not have aging signs. Otherwise replace a support.

8. Install the shock-absorber as it should be, the return to removal.