8.4.2. Replacement of steering draft

It will be required to you: pipe key, passatizh, bokoreza.
1. Remove an engine cross-piece from the car (see. "Removal and installation of a cross-piece of a forward suspension bracket").
2. Remove external tips of steering drafts (see. "Replacement of an external tip of steering draft"), having counted quantity of turns that at the return installation whenever possible not to break the angles of installation of wheels.
3. Squeeze the unbent collar ears …
4. … shift a collar on steering draft and remove it.
5. Have a bite the second collar of fastening of a protective cover …

Note
Collar of fastening of a protective cover disposable. At assembly of knot surely replace it new.

6. … also remove a protective cover.
7. Similarly remove the second cover.
8. Turn off steering draft a pipe key.
9. Similarly turn off the second steering draft (do not reinstall the steering mechanism in a vice).
10. Establish details as it should be, the return to removal. Whenever possible to keep adjustment of a convergence of wheels, at assembly of draft screw a tip on steering draft, having executed so many turns how many it is counted in item 2. Tighten bolts and nuts the moments specified in the appendix 1.
11. Remove air from system of the hydraulic booster of steering (see. "Pumping of system of the hydraulic booster of steering").
12. Check and if necessary adjust the angles of installation of forward wheels at the service station having the special equipment.