Ford:: Fusion:: Replacement of hoses and tubes of a hydraulic actuator of brakes

1. Car device
2. Recommendations about operation
3. Неисправностив ways
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
- 9.1. Features of the device
- 9.2. Possible malfunctions of the brake system, their reason and ways of elimination
- 9.3. Pumping of a hydraulic actuator of the brake system
- 9.4. Verification of the provision of a pedal of a brake
- 9.5. Main brake cylinder
- 9.6. Vacuum amplifier of brakes
- 9.7. Replacement of hoses and tubes of a hydraulic actuator of brakes
  - 9.7.1. Replacement of brake hoses
  - 9.7.2. Replacement of brake tubes
- 9.8. Brake mechanisms of forward wheels
- 9.9. Brake mechanisms of back wheels
- 9.10. Parking brake
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment

9.7. Replacement of hoses and tubes of a hydraulic actuator of brakes

Replace hoses and tubes if on them damages are found. Besides, we recommend in the preventive purposes to replace hoses through each 100 thousand km of a run or 5 years of operation of the car (depending on what will come earlier) even if they externally have no damages. Rubber of hoses grows old, and they can unexpectedly burst when braking.