Ford Fusion - the Repair manual and operation
1. Car device
2. Recommendations about operation
3. Неисправностив ways
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Useful tips
5.4. Check of a compression in cylinders
5.5. Removal and installation of a mudguard of the engine
5.6. Replacement of support of a suspension bracket of the power unit
5.6.1. Replacement of the right support of a suspension bracket of the power unit
5.6.2. Replacement of the left support of a suspension bracket of the power unit
5.6.3. Replacement of a back support of a suspension bracket of the power unit
5.7. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
5.8. Removal, installation and troubleshooting of a flywheel
5.9. Replacement of details of consolidation of the engine
5.10. Adjustment of gaps in the drive of valves
5.11. Head of the block of cylinders
5.12. Removal and installation of the engine
5.13. Lubrication system
5.14. Cooling system
5.15. System of production of the fulfilled gases
5.16. Power supply system
5.17. System of catching of vapors of fuel
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
5.6. Replacement of support of a suspension bracket of the power unit
Replacement of the right support of a suspension bracket of the power unit
Replacement of the left support of a suspension bracket of the power unit
Replacement of a back support of a suspension bracket of the power unit
The power unit is installed on two support with rubber pillows on the right and at the left and one support (too with a rubber pillow) fixed through an arm on a transmission case.