9.10.2. Replacement of back cables of the drive of the parking brake

Replace back cables of the drive of the parking brake at their excessive pulling (impossibility of adjustment of the parking brake), mechanical injuries of veins of cables or their covers.
It will be required to you: a key "on 7", a face head "on 10", passatizh, the screw-driver with a flat edge.
1. Completely weaken a tension of a forward cable of the drive of the parking brake for what turn off and remove a lock-nut from a carving tip of a cable, and turn off an adjusting nut till the end of a tip, but do not turn off a nut completely (see. "Adjustment of the drive of the parking brake").
2. Shift the lower tip of a cable 1 in the equalizer 2 back and, having turned a cable down, take its tip from the equalizer. Having squeezed passatizham clamps of a forward emphasis of covers of back cables, take an emphasis from an arm on a body.
3. Unbend an emphasis in connecting couplings of back cables …
4. … and, having shifted tips deep into of couplings, disconnect cables from couplings.
5. Squeeze clamps of the left cable the screw-driver …
6. … also take a cable from an arm on the left lever of a back suspension bracket.
7. Take out the rubber holder of a cable from a bracket on the lower lever …
8. … from a plastic arm also shoot a cable with floor panels.
9. In the similar way remove the right cable.
10. For replacement of the extender of the back cable established in the brake mechanism of a back wheel remove brake shoes of the mechanism (see. "Replacement of brake shoes of the brake mechanism of a back wheel").
11. Squeeze the screw-driver clamps …
12. … also take holders of cables from brake boards.
13. Unbend an emphasis in connecting couplings of back cables, having shifted tips deep into of couplings, and disconnect extenders of back cables from couplings.
14. Disconnect a cable extender tip from the razzhimny lever of the parking brake …
15. … and, having pushed the holder in a brake board opening, remove the extender of a back cable.
16. Establish details as it should be, the return to removal.
17. Adjust the drive of the parking brake (see. "Adjustment of the drive of the parking brake").