Connections of tubes with all knots of the brake system and hoses, and also the principles of their replacement are identical. All nuts of tubes are executed turnkey "on 11".

Note Works are shown on the example of the tube connecting the brake cylinder of the left back wheel to a hose.

1. For convenience of work remove a back wheel from the replaced brake tube.

2. Turn off a nut of fastening of a tube to the brake cylinder of the left back wheel and disconnect a tube.	3. Turn off a nut of fastening of a tube to a brake hose, holding a hose tip from a provorachivaniye the second key …

4. … also disconnect a tube.

5. Establish a new tube as it should be, the return to removal.

6. After replacement of a tube remove air from the brake system (see. "Pumping of a hydraulic actuator of the brake system").