8.5.3. Replacement of the steering mechanism

The steering mechanism is removed for repair or replacement.
It will be required to you: keys "on 10", "on 13", "on 15", a key hexagon "on 6".
1. Establish a steering wheel in the situation corresponding to the rectilinear movement of the car.

Good advice
In order to avoid breakage of a contact disk of a safety cushion record a steering wheel from a provorachivaniye by means of the locking mechanism of the anti-theft device of the lock of ignition. For this purpose take out a key from the lock of ignition and slightly turn a steering wheel until fixing of a shaft the anti-theft device.

2. In interior of the car under the dashboard turn out a bolt of klemmovy connection of a steering shaft with shaft of the steering mechanism …
3. … also separate shaft.
4. Remove a cross-piece of a forward suspension bracket assembled with the lower levers, the steering mechanism and a bar of the stabilizer (see. "Removal and installation of a cross-piece of a forward suspension bracket").
5. Turn out three bolts of fastening of the thermoscreen …
6. … also remove the thermoscreen.
7. Turn out a bolt of fastening of an arm of the drain pipeline …
8. … take a pipeline tip from the steering mechanism …
9. … also remove the pipeline.
10. On the left side turn out a bolt of fastening of the steering mechanism to an engine cross-piece, holding with the second key a nut from a provorachivaniye, and take a bolt.
11. Similarly turn out a bolt of fastening of the steering mechanism on the right side …
12. … also remove the steering mechanism.
13. Install the steering mechanism as it should be, the return to removal.
14. Remove air from system of the hydraulic booster of steering (see. "Pumping of system of the hydraulic booster of steering").