Note Back door quite bulky and heavy therefore we recommend to remove it with the assistant.

It will be required to you: the screw-driver with a flat edge, a key "on 10".

1. Remove an additional stoplight (see. "Replacement of an additional stoplight").

2. Disconnect a block of a plait of wires from lamps of illumination of registration plate (see. "Replacement of lamps of illumination of registration plate").

3. Disconnect a block of a plait of wires from the electric drive of the lock of a door of a back and separate a block of a plait of wires of the trailer switch on the lock (see. "Replacement of the lock of a door of a back").

4. Disconnect a block of a plait of wires from a back door glass cleaner motor-reducer (see. "Replacement of a motor-reducer of a screen wiper of a window of a door of a back").

5. Hook a rubber cover of a hose of a washer of a door of a back …	6. … bring him out of an opening at doors of a back and then take a hose from an opening.

Notes If you remove a back door not for replacement, tie a wire to a plait of wires and a hose of a washer and leave it in a door cavity that at installation of a door it was convenient to lay a plait of wires back. Mark an arrangement of loops of a door on a body to avoid their subsequent adjustment.

7. Similarly take a plait of wires of a door of a back.

8. Remove a back door emphasis (see. "Replacement of an emphasis of a door of a back").

9. Turn out two bolts of fastening of a door of a back to loops from each party and remove a back door from the car.

10. Establish a back door as it should be, the return to removal.