The oil pump is removed for repair at decrease in its giving causing continuous pressure drop of oil in the engine lubrication system and also at leak of oil through sealing laying.

It will be required to you: all tools necessary for removal of a belt of the drive of the gas-distributing mechanism and oil case of the engine.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Merge oil from the engine (see. "Replacement of oil in the engine and an oil filter").

3. Install the piston of the 1st cylinder in the provision of VMT of a step of compression (see. "Installation of the piston of the first cylinder in the provision of VMT of a step of compression").

4. Take off a belt of the drive of the gas-distributing mechanism and a tension roller (see. "Replacement of a belt of the drive of the gas-distributing mechanism and its tension roller").

Prevention After removal of a belt of the drive of the gas-distributing mechanism it is forbidden to turn cranked and camshafts as pistons can damage valves.

5. Remove an oil case of the engine (see. "Replacement of consolidation of an oil case").

6. Turn out two bolts and fastenings of an oil receiver to a maslouspokoitel and one bolt to the oil pump …	7. … also remove an oil receiver.

8. The flange of an oil receiver is condensed with a rubber ring. Surely replace strongly pressed out, hardened or torn ring, otherwise because of leakage of connection giving of the oil pump can sharply decrease.

Good advice At each removal of an oil receiver surely wash out its grid gasoline or kerosene to remove varnish deposits from oil.

9. Turn out eight bolts and remove the oil pump.

10. Install the oil pump as it should be, the return to removal.