11.8.2. Removal, installation and adjustment of the lock of a cowl, its drive, latch and safety hook

It will be required to you: keys "on 10" and "on 13", a face head "on 10", the screw-driver with a flat edge.
For removal of the lock of a cowl execute the following.
1. Open a cowl and establish it on an emphasis.
2. Shift a cowl lock drive cable tip forward …
3. … also disconnect it from the lock lever.
4. Take a cable cover tip from a groove in the lock case.
5. Turn out two bolts of fastening of the lock of a cowl to a radiator frame …
6. … also remove the lock.
7. Put the cowl lock as it should be, the return to removal. Before installation of the lock of a cowl grease its locking mechanism with jellied lubricant, for example litoly.
8. If after installation the lock is indistinctly locked or hardly opens, adjust its situation. Weaken bolts of fastening of the lock and its movement on a vertical or a horizontal within the openings of a frame of a radiator increased on diameter achieve accurate work.

For removal of a latch of the lock of a cowl execute the following.
1. Open a cowl and establish it on an emphasis.
2. Turn out four bolts of fastening of a latch to the internal panel of a cowl …
3. … also remove a latch.
4. Establish a cowl lock latch as it should be, the return to removal.

For removal of a safety hook of the lock of a cowl execute the following.
1. Remove the cowl lock (see above in this subsection).
2. Having wrung out the screw-driver a spring of a safety hook …
3. … remove a hook from an axis …
4. … also take it from an opening in a radiator frame, taking out in the direction of the movement of the car forward.
5. Establish details as it should be, the return to removal.

For removal of the drive of the lock of a cowl execute the following.
1. Open a cowl and establish it on an emphasis.
2. Shift a cowl lock drive cable tip forward …
3. … also disconnect it from the lock lever.
4. Take a cable cover tip from a groove in the lock case.
5. Cast away an air inlet peak (see. "Removal and installation of the air filter") …
6. … also take from under it a cable.
7. Take a cable from two holders on a framework of a motor compartment.
8. In interior of the car remove forward facing of the left threshold (see. "Removal and installation of facings of salon").
9. Disconnect a block of a plait of wires from the cowl lock drive handle case, having wrung out the screw-driver its clamp.
10. Turn out a bolt of fastening of the handle of the drive of a cowl to a body sidewall …
11. … also disconnect the handle from a sidewall, having brought the lower clamp of the case of the handle out of an opening in a sidewall.
12. Having hooked the screw-driver a cowl lock drive cable tip …
13. … disconnect it from the drive handle.
14. Take a cable from under one …
15. … and another holders on the handle, having pushed a cable tip the screw-driver, also remove the handle.
16. Take out a cable in a motor compartment, taking its sealant from an opening in a front board.
17. Establish details as it should be, the return to removal.