The air filter is removed at its damage and for receiving access to other units in a motor compartment.

It will be required to you: a face key "on 8", the screw-driver with a crosswise edge.

For removal of the air filter execute the following.

1. Remove the airbringing sleeve.	2. Remove a collar of fastening of a hose to a branch pipe of the air filter …

3. … disconnect a hose and take it aside.

Note Collar of fastening of a hose of one-time use, at assembly replace it new.

4. Disconnect a hose of ventilation of a case.	5. Turn out two bolts of fastening of the air filter …

6. … also remove the air filter.

7. Install the air filter as it should be, the return to removal.

For removal of an air inlet execute the following.

1. Remove the airbringing sleeve from an air inlet branch pipe.	2. Turn out plastic clamps …

3. … take percussion caps …	4. … also remove an air inlet.

5. Establish an air inlet as it should be, the return to removal.