It will be required to you: a face head "on 8", "on 10", "on 15", keys "on 13", "on 22".

1. Install the car on a viewing ditch or the elevator.

2. Disconnect a wire from the minus plug of the rechargeable battery.

3. Remove the engine (see. "Removal and installation of the engine").

4. Turn out four bolts of the top fastening of the thermofilter of a katkollektor.	5. Turn out two bolts from left …

6. … and on two bolts on the right side of the lower fastening of the thermofilter of a katkollektor …	7. … also remove the top thermoscreen of a katkollektor.

8. Turn out on one bolt from left …	9. … and the right side of fastening of the lower thermoscreen to a katkollektor …

10. … also remove the lower thermoscreen.

11. Turn out two bolts of fastening of a katkollektor to the block of cylinders.

12. Turn off four nuts of fastening of a flange of a katkollektor to a head of the block of cylinders …	13. … turn out the central bolt …

14. … also remove a katkollektor …	15. … and laying.

16. Establish a katkollektor as it should be, the return to removal.