7.2.6. Replacement of the bearing of a back nave
It will be required to you: stripper of lock rings, hammer, mandrel of suitable diameter.
1. Remove the brake drum (see. "Removal and installation of the brake drum").
|
2. Having accurately hooked the screw-driver, remove a ring of the sensor of anti-blocking system of brakes.
|
3. Take a lock ring …
4. … and vypressuyta hug bearing.
5. Clear an internal cavity of a nave and grease it with lubricant for Litol-24 bearings or its import analog.
6. Press the new bearing in a nave.
Prevention
At a press fitting the effort should be put to an external ring of the bearing, otherwise the bearing can be damaged.
|
7. Establish details as it should be, the return to removal. A nut of fastening of a nave tighten the moment of 235 N · m (23,5 kgfs · м).