1.10.1. Adjustment of provision of front seats

For ensuring the most convenient landing of people of different growth and a constitution the provision of seats of the driver and forward passenger can be changed in the longitudinal direction, on a tilt angle of a back and height of a head restraint. Besides, the driver's seat is in addition supplied with adjustment of height of a pillow, and a passenger seat (in alternative execution) – a possibility of folding of a seatback and is equipped with additional ware office.

Prevention
Regulate the provision of a seat of the driver only on the motionless car. If in attempt of adjustment in the movement you indistinctly record a seat in the longitudinal direction and it will unexpectedly move, then it is possible to lose control over the car.

For adjustment of provision of front seats in the longitudinal direction pull the handle of the blocking lever up and move a seat on a sled to a comfortable position. After installation of a seat lower the handle and small movements of a seat back and forth achieve its reliable fixing.
Adjustment of an inclination of a back is carried out rotation of the handle at the back basis.
The lever of adjustment of a pillow of a seat on height is at the left at a seat end face.
If it is necessary to lift a seat pillow, lift the lever up and release — the pillow slightly will rise. Repeat operation until the pillow does not reach the most convenient for you position.
If it is necessary to lower a seat pillow, lower the lever down and release — the pillow slightly will fall. Repeat operation until the pillow does not reach the most comfortable position.
Head restraints of front seats can be regulated on height: press a clamp and move a head restraint up or down on the required height. The optimum provision of a head restraint — its top edge is located flush with the top part of the head.

Note
For people of very high growth lift a head restraint in extreme top situation, for people of very low growth lower a head restraint in extreme lower situation.

If necessary (for example, for unfolding of a seat in sleeping situation) the head restraint can be removed.
For folding of a back of a passenger seat …
… pull a clamp …
… also put a back. To bring a back into horizontal position, turn the handle of provision of an inclination of a back in one or other party.
Display a seatback upside-down.

Note
For convenience of folding of a seatback remove a head restraint.

Preventions
The back of a front passenger seat has to be in vertical position if the seat behind it is occupied by the passenger.
If the back of a front passenger seat during the movement is put, then behind it children whose weight does not exceed 18 kg can occupy a seat.

To use the office which is under a seat pillow, execute the following.
Raise a forward part of a pillow of a seat up …
… shift it forward …
… also lift a back part.
Establish a seat pillow upside-down.