5.14.3. Replacement of a radiator of the cooling system
You will need a face head on "10".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Merge cooling liquid (see. "Replacement of cooling liquid").
3. Disconnect a block of a plait of wires from the electric motor of the fan and remove the electric fan (see. "Removal and installation of the electric fan of a radiator of the cooling system").
|
4. Having hooked the screw-driver, take a stopper …
|
5. … also remove the bringing hose from a radiator branch pipe.
|
6. Having squeezed passatizham the unbent collar ears, shift it on a hose …
|
11. … take a rubber pillow.
12. Similarly sort the right support.
13. Remove a front bumper (see. "Removal and installation of a front bumper and its amplifier").
|
14. Remove the forward amplifier (see. "Removal and installation of a front bumper and its amplifier").
|
15. Turn out two bolts from the left and right side of fastening of the forward panel of a front and accurately take away it as far as flexible hoses of the heat exchanger of the condenser will allow. Install the forward panel on an emphasis.
16. Bring the top left pin with the rubber plug out of an arm of the forward panel, and then right.
17. Accurately separate the forward panel of a front with the heat exchanger of the condenser and a radiator.
18. Disconnect a cooling system radiator from the condenser heat exchanger.
Prevention
Fix the condenser heat exchanger not to damage its highway.
|
19. Establish a new radiator of the cooling system and all removed details as it should be, the return to removal.