For replacement of the feeding pipeline of a hydraulic actuator of coupling execute the following.

1. Disconnect the feeding pipeline from the union of the main brake cylinder (see. "Replacement of the main cylinder of the drive of switching off of coupling").

2. Squeeze plastic clamps (for descriptive reasons this operation is shown on the removed tank of the main brake cylinder) …	3. … also remove the feeding hose from the union.

4. Establish the feeding hose and all earlier removed details as it should be, the return to removal.

For replacement of the pipeline of the working cylinder of coupling execute the following.

1. Disconnect a tip of the pipeline of the working cylinder of coupling from the union of the main cylinder of the drive of switching off of coupling (see. "Replacement of the main cylinder of the drive of switching off of coupling").

2. Turn out a bolt of fastening of the plug of a "mass" wire of a case of coupling …	3. … also take a wire aside.

4. Hook a bracket of fastening of a clamp of a tip of the pipeline, remove a bracket …	5. … also remove a pipeline tip from the union of the working cylinder of coupling.

6. Bring the pipeline of the working cylinder of coupling out of gearing with a clamp and remove the pipeline from the car.

7. Install the pipeline of the working cylinder of coupling as it should be, the return to removal.