It will be required to you: the screw-driver with a flat edge, the hammer, a mandrel.

1. For replacement of an epiploon of a half shaft merge oil from the transmission (see. "Replacement of oil in the transmission").

2. Remove the drive of a forward wheel from the replaced epiploon (see. "Removal and installation of drives of forward wheels").

3. Take an epiploon the screw-driver.	4. Grease a working edge of an epiploon with transmission lubricant and press it a mandrel of suitable diameter a working edge in a box.

5. Install the drive of a forward wheel (see. "Removal and installation of drives of forward wheels").

6. Fill in oil in the transmission (see. "Replacement of oil in the transmission").

7. The epiploon of a main shaft is replaced on the transmission removed from the car after removal of the working cylinder of the drive of switching off of coupling with the coupling switching off bearing (see. "Replacement of the working cylinder of the drive of switching off of coupling with the coupling switching off bearing"). Take an epiploon the screw-driver (or specially made wire hook).	8. Grease a working edge of an epiploon with transmission lubricant and press it a mandrel of suitable diameter a working edge in a box.