It will be required to you: keys "on 15", "on 18", TORX T50.

1. Slow down the car the parking brake and establish an antiretractable emphasis ("boots") under back wheels. Raise a jack a forward part of the car and establish it on support. Remove a wheel.

Prevention Weaken and tighten bolts of fastening of a wheel only on the car standing on the earth.

2. Turn off a nut, take out a coupling bolt of klemmovy connection of a rotary fist and a vypressuyta a finger of a spherical support (see. "Replacement of a spherical support of a damping rack").	3. Holding a key a bolt from a provorachivaniye, the second key turn off a nut and take out a bolt of forward fastening of the lever.

4. Turn out three bolts of fastening of a back support of the lever …	5. … also remove the lever assembled with a spherical support.

Note As original levers of a forward suspension bracket deliver in the spare part assembled with a spherical support and saylentbloka, further dismantling of the lever does not make sense.

6. Establish details as it should be, the return to removal, without delaying finally fastening of rubber-metal hinges of the lever.

7. Having lowered the car on the earth, several times strongly rock it. Finally tighten threaded connections of a suspension bracket on the car standing on the earth, the moment specified in the appendix 1.

Note After replacement of a spherical support of a forward suspension bracket check and if necessary adjust the angles of installation of wheels. Use services of the workshops having the special equipment.