10:12. Removal and installation of a washer of glass of a wind window

You will need a key "on 10".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the left forward flap (see. "Removal and installation of mudguards of wheels and flaps").
3. Separate hoses of a washer of glass of a wind window and a door of a back.
4. Squeeze a clamp of a block of a plait of wires of the electric pump of a washer …
5. … also disconnect a block from electric pump conclusions.
6. Turn out the top bolt of fastening of a washer reservoir.
7. Turn out the lower bolt of fastening of a washer reservoir.
8. Remove a tank from the arm located on a longeron …
9. … also take a washer reservoir from a wing cavity.
10. Merge liquid from a washer reservoir in in advance prepared capacity.
11. Disconnect hoses of a washer of glass of a wind window from electric pump unions …
12. … and back door window glasses.
13. Remove the electric pump.
14. Hook the screw-driver the sealing plug of the electric pump …
15. … also take the plug from an opening in a tank.

Note
The sealing plug of the electric pump is executed for a single whole with the filtering element.

16. In need of replacement of hoses bring them out of holders on a washer reservoir and a cowl and remove hoses.
17. For replacement of a jet of a washer disconnect a hose from the jet union.
18. Wring out the screw-driver a clamp …
19. … also take a washer jet from an opening in a cowl.
20. Establish all earlier removed details upside-down.