10:13. Replacement of a motor-reducer of a window regulator of a forward door

You will need TORX T30 key.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a door upholstery (see. "Removal and installation of an upholstery of a forward door").
3. Wring out a clamp of a block of a plait of wires of a motor-reducer of a window regulator and disconnect a block from motor-reducer conclusions.
4. Turn out three bolts of fastening …
5. … also remove a window regulator motor-reducer.
6. Establish a motor-reducer and all earlier removed details upside-down.

Good advice
Before installation apply jellied lubricant on a motor-reducer gear wheel.