In this subsection replacement of a seat belt of average and left passengers on a back seat is shown. The seat belt of the right passenger is replaced similarly.

It will be required to you: TORX T50 keys, "on 10", the screw-driver with a flat edge.

1. Cast away a pillow of a back seat forward and turn out a bolt of fastening of the lock of a seat belt of the right passenger on a back seat and the lower fastening of a belt of the average passenger.	2. Similarly remove locks of seat belts of average and right passengers on a back seat, having turned out two bolts of their fastening.

3. Turn out a bolt of the lower fastening of a seat belt of the left passenger on a back seat …	4. … also disconnect an arm of the lower fastening from the body basis.

5. Hook the screw-driver a decorative overlay of an arm of the top fastening of a seat belt of the left passenger on a back seat …	6. … also remove a slip.

7. Turn out a bolt of the top fastening of a belt and disconnect an arm from a body.

Note On a bolt remote and spring washers are established, do not lose them.

8. Remove the top and average facings of a sidewall (see. "Removal and installation of facings of a luggage carrier"), cast away a back of a back seat forward, turn out five bolts of fastening of a latch of the lock of a back …	9. … also remove a latch.

10. Turn out a bolt of fastening of the inertial coil to a sidewall …	11. … also remove a seat belt of the left passenger on a back seat.

12. Establish details as it should be, the return to removal.