It will be required to you: all tools necessary for removal of facing of a tunnel of the field, and also a face head "on 10".

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove facing of a tunnel of a floor (see. "Removal and installation of facing of a tunnel of a floor").

3. Press a finger a clamp of a black block of a plait of wires of the control unit of additional system of passive safety …	4. … also disconnect a block from the block.

5. Similarly disconnect a white block of a plait of wires from the block.

Note Remember or write down an arrangement of blocks of plaits of wires that at the return installation to connect them to the same nests of the block.

6. Turn off three nuts of fastening of the control unit to the body basis …	7. … also remove the block.

Notes Pay attention to marking of the control unit, for replacement buy the block with the same marking. The control unit can be installed on the car only in one situation. However for control on its label the arrow (see a photo) which has to be directed in the direction of the movement of the car forward is put.

8. Establish an electronic control unit by system of passive safety and all removed details as it should be, the return to removal.