11.9.1. Removal and installation of an upholstery of a forward door

It will be required to you: screw-drivers with flat and crosswise edges, TORX T40 key.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the control unit of external mirrors (see. "Replacement of the control unit of external mirrors").
3. Remove the internal handle of the drive of the lock of a door (see. "Replacement of the internal handle of the drive of the lock of a forward door").
4. Hook the screw-driver a decorative overlay of the handle of a door …
5. … and, overcoming resistance of plastic clamps …
6. … remove a slip.
7. Press clamps of blocks of plaits of wires of buttons of management of window regulators …
8. … also disconnect blocks from conclusions of buttons.
9. Turn out two screws of fastening of the handle of a door …
10. … also remove the handle.
11. Overcoming resistance of plastic holders, remove a door upholstery.

Notes
Plastic holders of an upholstery of a door are so located.
In case of damage of holders replace them new.

12. Establish an upholstery of a forward door as it should be, the return to removal.