It will be required to you: screw-drivers with flat and crosswise edges, a key "on 8".

1. Turn out the screw of fastening of an overlay of the external handle …	2. … accurately hook facing by the screw-driver …

3. … also remove facing of the handle.	4. Shift the external handle back and remove it, having brought its lead out of gearing with the lock lever, and a forward clamp — out of gearing with the amplifier of a door.

5. Remove the basis of a window regulator of a back door (see. "Replacement of a window regulator of a back door").

6. Turn out a nut of a hairpin of fastening of the lock of a door to the external panel of a door …	7. … turn out three screws of fastening of the lock of a door from a back end face of a door …

8. … squeeze plastic clamps …	9. … also remove the lock from a door.

10. For removal of a latch of the lock of a back door turn out two screws of its fastening to a rack of a body and remove a latch.

11. Put the lock of a back door and all removed details as it should be, the return to removal.

Note If necessary adjust the clearness of locking of the lock movement of a latch in the vertical or horizontal direction, having weakened its inhaling.