You will need the screw-driver with a flat edge.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove top …	3. … and lower parts of a casing of a steering column (see. "Removal and installation of casings of a steering column").

4. Press a clamp …	5. … disconnect a block of a plait of wires and remove contact group.

6. Wring out top (for descriptive reasons these operations are shown on the removed steering column) …	7. … and lower clamps …

8. … also remove contact group from the ignition switch.

9. Establish contact group and all earlier removed details upside-down.