10.22.1. Check and replacement of the sensor of the index of level of fuel

The sensor of the index of level of fuel is installed on the fuel module.
For check of the sensor you will need an autotester.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the fuel module (see. "Replacement of the fuel pump").
3. Hook the screw-driver …
4. … also disconnect a block from the plug of the fuel level sensor …
5. … and a block from the cover plug.
6. Squeeze clamps and take the fuel level sensor.
7. For check of the sensor of the index of level of fuel connect a tester in the ohmmeter mode to sensor conclusions.
8. Measure sensor resistance in the lower position of the lever with a float. Resistance has to make 200–206 Ohms.
9. Lift the lever with a float in extreme situation — resistance has to decrease to 7,7–9,3 Ohms. If resistance of the sensor differs from the given values, then the sensor is faulty and it needs to be replaced.
10. Establish the removed details as it should be, the return to removal.