10.22.5. Replacement of the sensor of provision of a pedal of coupling

The sensor of provision of a pedal of coupling is installed on an arm of pedal knot and settles down over a coupling pedal.
By pressing a pedal of coupling the sensor transmits a signal to an electronic control unit. EBU processes the received signal and improves operation of the engine.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Take the fixing bracket …
3. … also disconnect a block of wires from the sensor.

Further operations are for descriptive reasons shown on the removed pedal knot.

4. Turn the sensor counterclockwise …
5. … also take the sensor from an assembly opening.
6. Install the sensor in the sequence, the return to removal.