10.22.3. Check and replacement of the switch of light of a backing

The switch of light of a backing is installed in the top part of a case of the transmission.
You will need a key "on 22".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Squeeze a clamp …
3. … also disconnect a block of a plait of wires from the sensor.
4. Weaken a sensor inhaling …

It is for descriptive reasons shown on the removed transmission.

5. … also turn out it from a transmission case opening.
6. For check of the switch connect to its conclusions a tester in the ohmmeter mode. Resistance has to strive for infinity. Press a switch plunger (it is shown by an arrow) – resistance has to reduce to zero. Otherwise the switch is faulty and it needs to be replaced.
7. Install the backing light switch as it should be, the return to removal.