10.6.3. Removal and installation of a starter

It will be required to you: face keys "on 10", "on 13".
Install the car on a viewing ditch or the elevator.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Turn off a nut of the plus plug of food of a starter and remove the plug from a hairpin.
3. Turn off a nut of fastening of the plug of a wire of power supply of the traction relay (for descriptive reasons the oil filter is removed).
4. Take wires aside.

Note
Nuts of fastening of plugs of wires are so located (for descriptive reasons the inlet pipe is removed).

5. Turn out three bolts of fastening of a starter to a coupling case …
6. … also remove a starter.
7. Establish a starter as it should be, the return to removal.