10.9.6. Replacement of a back lamp

You will need TORX T25 key.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove facing of a back rack (see. "Removal and installation of facings of a luggage carrier").
3. Squeeze a clamp …
4. … also disconnect a block of a plait of wires from a conclusion of a back lamp.
5. Turn off the plastic holder of a back lamp in a luggage compartment.
6. Turn out two screws of fastening of a back lamp to a rack …

Screws of external fastening of a back lamp are so located.

7. … and, having overcome effort of a plastic clamp, remove a lamp.
8. Establish a new lamp and all earlier removed details upside-down.