10.9.3. Replacement of a block headlight

It will be required to you: the screw-driver with a flat edge or TORX T25 key.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a front bumper (see. "Removal and installation of a front bumper").
3. Press a clamp of a block of a plait of wires of a block headlight …
4. … also disconnect a block from block headlight conclusions.
5. Turn out one screw of side fastening of a block headlight to the forward panel of a body …
6. … and two screws of the top fastening.
7. Turn on 45 ° a plastic clamp of fastening of a block headlight to a wing …
8. … having shifted a block headlight sideways, bring a clamp out of an opening in a wing …
9. … also remove a block headlight.
10. Establish a block headlight and all earlier removed details upside-down.