For replacement of an electronic control unit with the engine it is necessary to have certain skills. In the absence of sufficient skill do not try to remove independently EBU, and address in a specialized workshop.

It will be required to you: drill, mm Zh6 drill, TORX T25 key.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove the shelf of the rechargeable battery (see. "Removal and installation of the rechargeable battery").

3. Hook the screw-driver clamps of fastening of the protection cover of a block of a plait of wires …	4. … also remove the protection cover.

5. Install in an opening the special directing plug for drilling of a bolt and drill a bolt.

6. Disconnect a block of a plait of wires from EBU.

7. Passatizhami take the bolt remains from a block.

8. Establish an electronic control unit by the engine and all earlier removed details the return order.